Gigamon GigaVUE TA Series, Hardware Installation Manual

Page: 53 / 108

Basic Connections and Configuration 53
Avoid Electrostatic Damage!
I
MPORTANT
:
Always take precautions to avoid electrostatic damage:
• Always use an ESD-preventive wrist or ankle strap and ensure that it
makes good skin contact. The strap can be connected to one of the
following:
• Captive installation screws on chassis.
• Any unpainted surface on the chassis.
• Avoid contact between the cards and clothing. The wrist strap protects
only the chassis from ESD voltages on the body. ESD voltages on
clothing can still cause damage.
Connecting Power to the GigaVUE TA Series
The procedure below describes how to supply power to the GigaVUE
TA Series node.
1.
Plug an approved C13 power cable into each of the power supplies at the
rear of the GigaVUE TA Series as shown in
Figure 4-3 to Figure 4-5 .
NOTE:
For information on connecting the optional DC power supplies,
Refer to Connecting -48V DC Power Supplies on page 54 .
Figure 4-3: Connecting AC Power
Figure 4-4: Connecting AC Power on a GigaVUE-TA100