Gigamon GigaVUE TA Series, Hardware Installation Manual

Page: 38 / 108

38 GigaVUE TA Series Hardware Installation Guide
...
1st flash version: amibios-ta200-1.0.9 Fri Feb 9 04:52:22 UTC 2018**
2nd flash version: amibios-ta200-1.0.9 Fri Feb 9 04:52:22 UTC 2018
SW BIOS version: amibios-ta200-1.0.9 Fri Feb 9 04:52:22 UTC 2018
...
If there is a component failure in the primary flash, the GigaVUE-TA200 boots from a
backup golden BIOS image in the secondary flash. An SNMP trap can be configured to
be sent when the system has booted from the secondary flash. The trap may indicate
that the primary flash component needs to be serviced. The trap is as follows:
2ndflashboot: Secondary flash boot notification
Air Flow Direction
The air flow direction is from the front of the GigaVUE-TA200 chassis to the rear. The
rear-mounted fans pull air from the front to the back of the chassis. Install the chassis
so the intake air at the front of the chassis is cold.
AC and DC-Powered GigaVUE-TA200 Models
Gigamon provides both AC and DC-powered versions of the GigaVUE-TA200. Refer to
Connecting -48V DC Power Supplies on page 54 .
Battery Caution
A disposable, non-rechargeable, Real Time Clock (RTC) Lithium metal coin cell battery
is in the GigaVUE-TA200. Note the following:
• There is a risk of fire if the battery is replaced with an incorrect type.
• Use only CR-2032L type Lithium metal coin cell battery and replace with the same.