Gigabyte W536M, User Manual

Page: 71 / 89

4 The BIOS Setup Program
4-10
Password on boot
If password on boot is required, the password must be set otherwise it cannot be
enabled. Enable this field to have setup prompt for the password when the computer
boots.
Built-in HDD1 Status
Set HDD Password is set.
Clear
HDD Password is not set.
Built-in HDD1 Password Select
User Only
For normal user entering HDD password.
User+Master Master password must be set first before user password
can be configured.
Set HDD User Password / Set HDD Master Password
Enter this field always shows the message.
While this field is highlighted, press [Enter]. The following message is shown:
Set HDD Master Password
Enter New Password [ ]
Confirm New Password [ ]
If there is an existing password then setup will prompt with the following window
instead and the current password will be required to be entered at first:
Set HDD Master Password
Enter Current Password [ ]
Enter New Password [ ]
Confirm New Password [ ]
User can type password in field of
Enter New Password
, and re-enter password in
field of
Confirm New Password
for verification.
If verification OK:
Setup Notice
Changes have been saved.
[Continue]
The HDD password is saved after pressing [Enter].
If verification fails:
Setup Warning
Passwords do not match.
Re-enter password.
[Continue]