Gigabyte GA-Z170X-SOC Force User Manual Download Page 62

Page: 62 / 132

BIOS Setup

- 62 -

2-6 Peripherals

Intel Platform Trust Technology (PTT)

Enables or disables Intel

PTT Technology. (Default: Disabled)

Initial Display Output

Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard

graphics.

IGFX

Sets the onboard graphics as the first display.

PCIe 1 Slot

Sets the graphics card on the PCIEX16_1 slot as the first display. (Default)

PCIe 2 Slot

Sets the graphics card on the PCIEX8_1 slot as the first display.

PCIe 3 Slot

Sets the graphics card on the PCIEX16_2 slot as the first display.

PCIe 4 Slot

Sets the graphics card on the PCIEX8_2 slot as the first display.

Audio LED

Enables or disables the onboard audio LED function.

Off

Disables this function.

Still Mode

The LEDs stay constantly on. (Default)

Beat Mode

The brightness of the LED changes according to the music rhythm.

Pulse Mode

The brightness of the LED changes slowly and smoothly like breath.

Rear Panel LED

Enables or disables the audio LED on the rear panel I/O shield.

The LED will light and follow the behavior of the onboard audio LEDs. (Default)

Off

Disables this function.

Legacy USB Support

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

XHCI Hand-off

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off

support. (Default: Disabled)

USB Mass Storage Driver Support

Enables or disables support for USB storage devices. (Default: Enabled)

Summary of Contents for GA-Z170X-SOC Force





































































































































Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands

Gigabyte GA-Z170X-SOC Force, User Manual

Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands