Gigabyte GA-Z170X-SOC Force User Manual Download Page 52

Page: 52 / 132

BIOS Setup

- 52 -

VAXG Loadline Calibration

Allows you to set the Load-Line Calibration level for the CPU VAXG voltage. The levels are (from highest

to lowest): Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the CPU

VAXG voltage more consistent with what is set in BIOS under heavy load.

Auto

lets the BIOS automatically

configure this setting and sets the voltage following Intel's specifications. (Default: Auto)

CPU Vcore Protection

Allows you to set the over-current protection level for the CPU Vcore voltage. The adjustable range is from

150.0mV to 400.0mV.

Auto

lets the BIOS automatically configure this setting. (Default: Auto)

DDR CH(A/B) Voltage Protection

Allows you to set the over-current protection level for Channel A and Channel B memory voltage. The

adjustable range is from 200.0mV to 500.0mV.

Auto

lets the BIOS automatically configure this setting.

(Default: Auto)

VAXG Protection

Allows you to set the over-current protection level for the CPU VAXG voltage. The adjustable range is from

150.0mV to 400.0mV.

Auto

lets the BIOS automatically configure this setting. (Default: Auto)

CPU Vcore Current Protection

Allows you to set the over-current protection level for the CPU Vcore voltage.

Auto

Lets the BIOS automatically configure this setting. (Default)

Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different

level of over-current protection for the CPU Vcore voltage.

DDR CH(A/B) Current Protection

Allows you to set the over-current protection level for Channel A and Channel B memory voltage.

Auto

Lets the BIOS automatically configure this setting. (Default)

Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different

level of over-current protection for the memory voltage.

VAXG Current Protection

Allows you to set the over-current protection level for the CPU VAXG voltage.

Auto

Lets the BIOS automatically configure this setting. (Default)

Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different

level of over-current protection for the memory voltage.

DDR VPP CH(A/B) Current Protection

Allows you to set the over-current protection level for memory VPP voltage.

Auto

Lets the BIOS automatically configure this setting. (Default)

Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different

level of over-current protection for the memory VPP voltage.

CPU Vcore PWM Switch Rate

Allows you to set the PWM frequency for the CPU Vcore voltage. The adjustable range is from 300.0KHz

to 500.0KHz. (Default: Auto)

DDR CH(A/B) PWM Switch Rate

Allows you to set the PWM frequency for Channel A and Channel B memory. The adjustable range is from

300.0KHz to 500.0KHz. (Default: Auto)

Summary of Contents for GA-Z170X-SOC Force





































































































































Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands

Gigabyte GA-Z170X-SOC Force, User Manual

Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands