Gigabyte GA-Z170X-SOC Force User Manual Download Page 80

Page: 80 / 132

Configuring a RAID Set

- 80 -

Delete RAID Volume

To delete a RAID array, select

Delete RAID Volume

MAIN MENU

and press <Enter>. In the

DELETE

VOLUME MENU

section, use the up or down arrow key to select the array to be deleted and press <Delete>.

When prompted to confirm your selection (Figure 19), press <Y> to confirm or <N> to abort.

Figure 19

Acceleration Options

This option allows you to view the status of your accelerated drive/volume (Figure 20) created using the Intel

IRST utility. In case you are unable to run the Intel

IRST utility due to an application error or operating system

issue, you will need to remove acceleration or manually enable synchronization (Maximized mode only) using

this option in the RAID ROM utility.

Steps:
Select

Acceleration Options

MAIN MENU

and press <Enter>.

To remove the acceleration, select the accelerated drive/volume, press <R>, and press <Y> to confirm.
To synchronize data from the cache device to the accelerated drive/volume, press <S> and press <Y> to confirm.

Figure 20

Intel(R) Rapid Storage Technology - Option ROM - 14.0.0.2209

Deleting a volume will reset the disks to non-RAID.

WARNING:

ALL DISK DATA WILL BE DELETED.

(This does not apply to Recovery volumes)

[

]-Select

[ESC]-Previous Menu

[DEL]-Delete Volume

[ HELP ]

[ DELETE VOLUME MENU ]

Name

Level

Drives

Capacity Status Bootable

Volume0

RAID0(Stripe)

931.5GB

Normal

Yes

ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)

Are you sure you want to delete "Volume0"? (Y/N) :

[

DELETE VOLUME VERIFICATION

]

Intel(R) Rapid Storage Technology - Option ROM - 14.0.0.2209

Press 's' to synchronize data from the cache device to

the Accelerated Disk/Volume

Press 'r' to remove the Disk/Volume Acceleration

WARNING:

IT IS RECOMMENDED THAT YOU PERFORM A SYNCHRONIZATION

BEFORE REMOVING ACCELERATION

[

]-Select

[ESC]- Previous Menu

[ HELP ]

[ ACCELERATION OPTIONS ]

Name Type

Capacity Mode Status

DISK PORT 3

Non-RAID Disk

465.7GB

Enhanced

In Sync

Summary of Contents for GA-Z170X-SOC Force





































































































































Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands

Gigabyte GA-Z170X-SOC Force, User Manual

Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands