Gigabyte GA-Z170X-SOC Force User Manual Download

Page: 10 / 132

- 10 -

Hardware Installation

1-2 Product Specifications

CPU

Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/

Intel

Celeron

processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z170 Express Chipset

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR4 2133 MHz memory modules

Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard
Graphics

Integrated Graphics Processor-Intel

HD Graphics support:

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port does not support D-Sub connection by adapter.

1 x Mini-DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz

* Support for DisplayPort 1.2 version.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz

* Support for HDMI 1.4 version.

Support for up to 3 displays at the same time

Maximum shared memory of 512 MB

Audio

ealtek

ALC1150 codec

High De

nition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Intel

GbE LAN chip (10/100/1000 Mbit

)

Expansion Slots

2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)

* For optimum performance, if only one PCI Express graphics card is to be installed, be

sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics

cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2

slots.

2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)

* The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2

slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode

when the PCIEX8_1/PCIEX8_2 is populated.

3 x PCI Express x1 slots

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

Multi-Graphics

Technology

Support for 4-Way/3-Way/2-Way AMD CrossFire

™

/NVIDIA

SLI

™

technology

Summary of Contents for GA-Z170X-SOC Force





































































































































Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands

Gigabyte GA-Z170X-SOC Force, User Manual

Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands