Gigabyte GA-Z170X-SOC Force User Manual Download

Page: 22 / 132

- 22 -

Hardware Installation

1-7 Back Panel Connectors

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

DVI-D Port

(Note)

The DVI-D port conforms to the DVI-D specification and supports a maximum resolution of 1920x1200@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports DVI-D

connection to this port.

OCPSW Button

This button allows you to use your smart phone/tablet device to overclock or monitor your computer

with the GIGABYTE HW OC app. Refer to the instructions on using this feature in Chapter 5, "Using

GIGABYTE HW OC."

Mini-DisplayPort

DisplayPort delivers high quality digital imaging and audio, supporting bi-directional audio transmission. Display-

Port can support both DPCP and HDCP content protection mechanisms. You can use this port to connect your

Mini-DisplayPort-supported monitor. The maximum supported resolution is 4096x2304@60 Hz, but the actual

resolutions supported are dependent on the monitor being used.

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.

Use this port for USB devices.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD Mas-

ter Audio formats. It also supports up to 192 KHz/24bit 8-channel LPCM audio out-

put. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is

4096x2160@24 Hz, but the actual resolutions supported are dependent on the monitor being used.

•

To set up a triple-display configuration, you must install motherboard drivers in the operating system first.

•

After installing the HDMI/Mini-DisplayPort device, make sure to set the default sound playback device

to HDMI/DisplayPort. (The item name may differ depending on your operating system.)

In Windows 8.1, select Apps>Control Panel>Hardware and

Sound>Sound>Playback, set Intel(R) Display Audio to the

default playback device.

(Note) The DVI-D port does not support D-Sub connection

by adapter.

Summary of Contents for GA-Z170X-SOC Force





































































































































Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands

Gigabyte GA-Z170X-SOC Force, User Manual

Search results

Summary of Contents for GA-Z170X-SOC Force

Reviews:

Related manuals for GA-Z170X-SOC Force

Brands by name

Popular brands