Gigabyte G-MAX N411, User Manual

Page: 90 / 110

G-MAX
TM
N411 User’s Manual
78
6.1 Memory Upgrade Procedures
Your notebook computer G-MAX N411 offers two memory slots
using 200-pin SODIMM (Small Outline Dual Inline Memory
Module) at least 128MB DDR SDRAM. One of them is for on
board memory module, you can use another to add and upgrade.
The memory compartment is located just under your notebook
computer G-MAX N411.
Based Memory Installing Memory Total
512 MB 0 MB 512 MB
512 MB 128 MB 640 MB
512 MB 256 MB 768 MB
512 MB 512 MB 1024 MB
Installing Memory Module
Your notebook computer G-MAX N411 comes with standard
512MB of synchronous DDR SDRAM. You can increase system
memory to a maximum of 1024 MB in the system, by installing
one small outline double inline memory modules (SO-DIMMs)
with installed base memory in the system.
The 128MB, 256MB and 512MB memory module are available.
To install the memory module:
1.
Make sure the system is powered off, the battery also is
removed and that no peripheral devices are attached.
2. Turn your notebook computer G-MAX N411 upside-down
and locate the screw that secures the DIMM door at the
underside of your notebook computer G-MAX N411.