Gigabyte G-MAX N411, User Manual

Page: 78 / 110

G-MAX
TM
N411 User’s Manual
66
5.4 Using the External Audio
System
At the left side of your notebook computer G-MAX N411, you will
find the built-in audio ports. You can connect Microphone jack,
earphone or powered speaker.
To connect to a audio jack:
1. Locate the audio port (Microphone, Headphone) that you
want to use to the target device.
2. Plug the jack into the port on the left side of the system.
If you use external speakers and experience the sound
distortion or feedback, please lower the volume. Some
factors is caused by too close locating the microphone
and speakers from each other, moving away the external
audio option from the unit may also help.
5.5 Using the LAN Port
Your notebook computer G-MAX N411 comes with a internal 10
Base-T/100 Base-TX LAN module that connects your notebook
computer G-MAX N411 to other computers/networks through a
local area network (LAN) and supports data transfer rates at 10
Mbps and can be up to 100 Mbps. The 10Base-T standard also
called Twisted Pair Ethernet is connected with RJ-45 connectors.
The 100 Base-TX is based on the older Ethernet standard.
Because it is 10 times faster than Ethernet, it is often referred to
as Fast Ethernet.
The built-in LAN module provides a standard RJ-45 connector.
To connect the twisted-pair cable to your LAN port:
1.
Prepare one twisted-pair cable. Each end of the cable has a
RJ-45 connector.
2. Connect one end of the cable into the network wall outlet or
HUB.
3.
Connect the other end of the cable into the computer RJ-45
LAN port.