Gigabyte G-MAX N411, User Manual

Page: 77 / 110

5 Connecting to Peripherals
65
3. Connect the monitor power cable and plug it into a properly
grounded wall outlet.
4. Turn on the power of the monitor.
5. Turn on your notebook computer G-MAX N411. Both the
LCD panel and the monitor screen will show the display.
Your notebook computer G-MAX N411 is set at default to
run at simultaneous display mode.
6. If you only want to show the display on the external monitor
(CRT/LCD) and shut off the LCD display, you can use the
<Fn> + <F10> hot-key to switch display type between LCD
and CRT. Keep pressing the hot-key until you get the display
to external CRT/LCD only.
5.3 Using the IEEE 1394 Port
IEEE 1394 is a new I/O standard that is supported by Win98
(second edition) or later Windows version. With supporting
high-speed transmission and delivering data at a guaranteed
rate, you can record digital video clips and download them
directly via a super-speed IEEE 1394 port at the left side of your
notebook computer G-MAX N411. IEEE 1394 becomes an ideal
for devices that need to transfer high speed data in real-time.
With built-in IEEE 1394 port, your notebook computer G-MAX
N411 enables the peripheral devices in transmitting digital video
data or data backup. The Windows system will automatically
recognize it in installing a suitable driver for it.
Moreover, you should install the driver of peripheral device to
connect with the IEEE 1394 port, for details please refer to the
manual that comes with your peripheral devices.
Please make sure that the external IEEE 1394 HDD box
you purchase on local electronic store should provide
external power adapter. There are different types of
IEEE1394 HDD box and hard disk from different
manufacturers, the power consumption has varied range.
If the power of the external IEEE 1394 HDD is supplied
from the USB of your notebook computer G-MAX N411, it
may not run properly.