Coniguring SATA Hard Drive(s)
- 66 -
The BIOS Setup menus described in this section may differ from the exact settings for your motherboard.
The actual BIOS Setup menu options you will see shall depend on the motherboard you have and
the BIOS version.
B. Coniguring SATA controller mode in BIOS Setup
Make sure to conigure the SATA controller mode correctly in system BIOS Setup.
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Go
to
Peripherals\SATA Coniguration
, make sure
Integrated SATA Controller
is enabled. To create RAID, set
SATA Mode Selection
to
RAID
(Figure 1). If you do not want to create RAID, set this item to
IDE
or
AHCI
.
Step 2:
If you want to conigure UEFI RAID, follow the steps in "C-1." To enter the legacy RAID ROM, save the settings
and exit BIOS Setup. Refer to "C-2" for more information.
Figure 1
