GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT User Manual Download Page 60

Page: 60 / 132

BIOS Setup

- 60 -

Serial ATA Port 0/1/2/3/4/5

Port 0/1/2/3/4/5

Enables or disables each SATA port. (Default: Enabled)

Hot plug

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

External SATA

Enables or disables support for external SATA devices. (Default: Disabled)

Super IO Coniguration

This section provides information on the super I/O chip and allows you to conigure the serial port.

Serial Port A

Enables or disables the onboard serial port. (Default: Enabled)

Intel(R) Smart Connect Technology

ISCT Support

Enables or disables Intel

Smart Connect Technology. (Default: Disabled)

Marvell SATA Controller Coniguration (Marvell

88SE9172 Chip, GSATA3 6/7 connectors)

GSATA Controller

Enables or disables RAID for the SATA controllers integrated in the Marvell

SATA controllers or conigures

the SATA controllers to AHCI mode.The area below displays the current status of each SATA port.

IDE Mode

Disables RAID for the SATA controllers and conigures the SATA controllers to IDE

mode.

RAID Mode

Enables RAID for the SATA controllers.

AHCI Mode

Conigures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface speciication that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug. (Default)

Disabled

Disables this function.

Summary of Contents for GA-Z97X-Gaming GT





































































































































Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT, User Manual

Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands