- 33 -
Hardware Installation
15) COMA (Serial Port Header)
The COM header can provide one serial port via an optional COM port cable. For purchasing the optional
COM port cable, please contact the local dealer.
Pin No.
Deinition
1
NDCD-
2
NSIN
3
NSOUT
4
NDTR-
5
GND
6
NDSR-
7
NRTS-
8
NCTS-
9
NRI-
10
No Pin
10
9
2
1
16) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS coniguration and reset the CMOS values to factory defaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
•
Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
•
After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually conigure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS conigurations).
Open: Normal
Short: Clear CMOS Values
