GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT User Manual Download Page 10

Page: 10 / 132

- 10 -

Hardware Installation

1-2 Product Speciications

CPU

Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/Intel

Celeron

processors

in the LGA1150 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z97 Express Chipset

Memory

4 x DDR3 DIMM sockets supporting up to 32 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR3 1600/1333 MHz memory modules

Support for non-ECC memory modules

Support for Extreme Memory Proile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard
Graphics

Integrated Graphics Processor:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60Hz

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24Hz or

2560x1600@60Hz

* Support for HDMI 1.4a version.

- 1 x DisplayPort, supporting a maximum resolution of 4096x2160@24Hz or

3840x2160@60Hz

* Support for DisplayPort 1.2 version.

Support for up to 3 displays at the same time

Maximum shared memory of 1 GB

Audio

Realtek

ALC1150 codec

TI Burr Brown

OPA2134 operational ampliier

Support for Sound Blaster X-Fi MB3

High Deinition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Qualcomm

Atheros Killer E2201 LAN chip (10/100/1000 Mbit)

Expansion Slots

2 x PCI Express x16 slots, running at x16 (PCIEX16_1~2)

* For optimum performance, if only one PCI Express graphics card is to be installed, be

sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics
cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2
slots.

2 x PCI Express x16 slots, running at x8 (PCIEX8_1~2)

* The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2

slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode
when the PCIEX8_1/PCIEX8_2 is populated.

(The PCI Express x16 slots conform to PCI Express 3.0 standard.)

3 x PCI Express x1 slots

(The PCI Express x1 slots conform to PCI Express 2.0 standard.)

Summary of Contents for GA-Z97X-Gaming GT





































































































































Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT, User Manual

Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands