GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT User Manual Download Page 103

Page: 103 / 132

- 103 -

Unique Features

5-2-4 Fast Boot

Through the simple GIGABYTE Fast Boot

(Note 1)

interface, you can enable or change the Fast Boot or Next Boot

After AC Power Loss setting right in the operating system.

The Fast Boot Interface

Using Fast Boot

•

BIOS Fast Boot:

This option is the same as the

Fast Boot

option

(Note 2)

in BIOS Setup. It allows you to enable or disable the

fast boot function to shorten OS boot time.

•

AC OFF Mode:

This option is the same as the

Next Boot After AC Power Loss

option

(Note 2)

in BIOS Setup. It allows you to

select the system bootup mode upon the return of an AC power loss. (This mode is conigurable only when

BIOS Fast Boot

is set to

Fast

Ultra Fast

After you conigure the setting, click

Save

to save and click

Exit

. The settings will take effect on next boot. If you

click the

Enter BIOS Setup Now

button, the system will restart and enter BIOS Setup immediately.

(Note 1) This function is supported by Windows 8.1/8 only.
(Note 2) For more details about this function, refer to Chapter 2, "BIOS Features."

Summary of Contents for GA-Z97X-Gaming GT





































































































































Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT, User Manual

Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands