GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT User Manual Download Page 23

Page: 23 / 132

- 23 -

Hardware Installation

Audio Gain Control Switch

This switch allows for audio gain control for the line-out jack on the back panel. Please make sure all of the

dips are set in the same position and are set according to your headphone speciication (actual effects may

vary by the device being used).

Pin No.

Deinition

Power

GND

Voltage Measurement Points

Users can use a multimeter to measure component voltages, including VRIN, VIOD, VSA, VAXG, VIOA, VRING,
VDIMM, and VCORE. You can employ following way to measure component voltages.

Steps:

Connect the red lead of the multimeter to the pin 1 (Power) of a voltage

measurement point and the black lead to the pin 2 (ground).

VRIN

Pin 1

VIOD

Pin 1

VSA

Pin 1

VAXG

Pin 1

VIOA

Pin 1

VRING

Pin 1

VDIMM

Pin 1

VCORE

Pin 1

Gain Ratio

DIP Setting

DIP 1

DIP 2 DIP 3 DIP 4

2.5X

OFF

GAIN

Summary of Contents for GA-Z97X-Gaming GT





































































































































Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT, User Manual

Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands