GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT User Manual Download Page 53

Page: 53 / 132

- 53 -

BIOS Setup

2-5

BIOS Features

Boot Option Priorities

Speciies the overall boot order from the available devices.

Removable storage devices that support GPT format will be preixed with "UEFI:" string on the boot device

list. To boot from an operating system that supports GPT partitioning, select the device preixed with "UEFI:"

string.

Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select

the optical drive that contains the Windows 7 64-bit installation disk and is preixed with "UEFI:" string.

Bootup NumLock State

Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default:

Enabled)

Summary of Contents for GA-Z97X-Gaming GT





































































































































Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-Z97X-Gaming GT, User Manual

Search results

Summary of Contents for GA-Z97X-Gaming GT

Reviews:

Related manuals for GA-Z97X-Gaming GT

Brands by name

Popular brands