GIGA-BYTE TECHNOLOGY GA-6LXGH User Manual Download Page 75

Page: 75 / 103

- 75 -

BIOS Setup

2-3-2 PCH-IO Configuration

Intel PCH RC Version/Intel PCH SKU/Intel PCH Rev ID Information

Displays the RC version, SKU and Reverison ID information of PCH.

PCI Express Configuration

Press [Enter] for configuration of advanced items.

USB Configuration

Press [Enter] for configuration of advanced items.

DeepSx Power Policies

Configure the DeepSx Mode configuration.

Options available: Disabled/Enabled in S5/Enabled in S4-S5. Default setting is

Disabled

GP27 Wake From DeepSx

Wake from DeepSx by the assertion of GP27 pin.

Options available: Enabled/Disabled. Default setting is

Enabled

PCIE Wake From DeepSx

Wake from DeepSx by the assertion of PCIe.

Options available: Enabled/Disabled. Default setting is

Disabled

Serial IRQ Mode

Configure Serial IRQ Mode.

Options available: Quiet/Continuous. Default setting is

Quiet

SB CRID

Enable/Disable SB CRID.

Options available: Enabled/Disabled. Default setting is

Disabled

Summary of Contents for GA-6LXGH








































































































Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-6LXGH, User Manual

Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands