GIGA-BYTE TECHNOLOGY GA-6LXGH User Manual Download Page 67

Page: 67 / 103

- 67 -

BIOS Setup

PORT CONFIGURATION MENU

NIC Configuration

Press [Enter] for configuration of advanced items.

Blink LEDs (range 0-15 seconds)

Blink LEDs for the specified duration (up to 15 seconds).

Press the numberic keys to input the desired value.

PORT CONFIGURATION INFORMATION
UEFI Driver

Display the UEFI driver information.

Adapter PBA

Display the Adapter PBA information.

Chip Type

Display the Chip type.

PCI Device ID

Display the PCI device ID.

Bus:Device:Function

Display the number of Bus/Device/Function

Link Status

Display the link status.

MAC Address

Display the Factory MAC address information.

Virtual MAC Address

Display the virtual MAC address information.

Link Speed

Change link speed duplex for current port.

Options available: AutoNeg/10Mbps Half/10Mbps Half/10Mbps Half/100Mbps Full.

Default setting is

AutoNeg

Wake On LAN

Enable/Disable Wake On LAN feature.

Options available: Enabled/DIsabled. Default setting is

Enabled

Summary of Contents for GA-6LXGH








































































































Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-6LXGH, User Manual

Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands