GIGA-BYTE TECHNOLOGY GA-6LXGH User Manual Download Page 72

Page: 72 / 103

BIOS Setup

- 72 -

Detect Non-Compliance Device

Detect Non-Compliance PCI Express Device in PEG.

Options available: Enabled/Disabled. Default setting is

Disabled

Program PCIe ASPM after OpROM

Enable/Disable Program PCIe ASPM after OpROM.

Options available: Enabled/Disabled. Default setting is

Disabled

PEG0 De-emphasis Control

PEG0:Configure the De-emphasis control on PEG.

Options available: Options available: -6 dB/-3.5 dB. Default setting is

-3.5 dB

PEG1 De-emphasis Control

PEG1:Configure the De-emphasis control on PEG.

Options available: Options available: -6 dB/-3.5 dB. Default setting is

-3.5 dB

PEG2 De-emphasis Control

PEG2:Configure the De-emphasis control on PEG.

Options available: Options available: -6 dB/-3.5 dB. Default setting is

-3.5 dB

PEG0 - ASPM

Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device.

Options available: Enabled/Disabled. Default setting is

Disabled

PEG1 - ASPM

Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device.

Options available: Enabled/Disabled. Default setting is

Disabled

PEG2 - ASPM

Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device.

Options available: Enabled/Disabled. Default setting is

Disabled

PEG Sampler Calibrate

Enable or disable PEG Sampler Calibrate\nAuto means Disabled for SNB MB/DT, Enabled for IVB A0
B0.

Options available: Enabled/Disabled. Default setting is

Disabled

Swing Control

Perform PEG Swing Control, on IVB C0 and Later.

Options available: Reduced/Half/Full. Default setting is

Full

PEG Gen3 Equalization

Perform PEG Gen3 Equalization steps.

Options available: Enabled/Disabled. Default setting is

Enabled

Gen3 Eq Preset Search

Perform PEG Gen3 Preset Search algorithm, on IVB C0 and Later.

Options available: Enabled/Disabled. Default setting is

Enabled

PEG RxCEM LoopBack Mode

Options available: Enabled/Disabled. Default setting is

Disabled

Summary of Contents for GA-6LXGH








































































































Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-6LXGH, User Manual

Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands