GIGA-BYTE TECHNOLOGY GA-6LXGH User Manual Download Page 23

Page: 23 / 103

- 23 -

Hardware Installation

•

Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

•

These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.

3/4/5/6/7) CPU0_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3/SYS_FAN4
(CPU Fan/System Fan Headers)

The motherboard has a 4-pin CPU fan header (CPU0_FAN), and four 4-pin (SYS_FAN1/SYS_FAN2/
SYS_FAN3/SYS_FAN4) system fan headers. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire

is the ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU

fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be

installed inside the chassis.

CPU0_FAN

SYS_FAN4

SYS_FAN3

SYS_FAN2

SYS_FAN1

Pin No. Definition

GND

+12V

Sense

Speed Control

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

8) PMBUS (PMBus connector)

Pin No. Definition

SMB CLK

SMB DATA

SMB Alert

GND

3.3V Sense

Summary of Contents for GA-6LXGH








































































































Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-6LXGH, User Manual

Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands