GIGA-BYTE TECHNOLOGY GA-6LXGH User Manual Download Page 97

Page: 97 / 103

- 97 -

BIOS Setup

2-7-2 CSM Parameters

CSM parameters

Press Enter to configure the advanced items.

Launch

CSM (Compatibility Support Module)

Enable/Disable Compatibility Support Module (CSM) launch.

Options available: Enabled/Disabled. Default setting is

Enabled

Boot option filter

Determines which devices system will boot to.

Options available: UEFI and Legacy/Legacy only/UEFI only. Default setting is

UEFI and Legacy

Launch PXE OpROM policy

Determines which devices system will boot to.

Options available: Do not launch/UEFI only/Legacy only/Legacy first/UEFI first. Default setting is

Legacy Only

Launch Storage OpROM policy

Determines which devices system will boot to.

Options available: Do not launch/UEFI only/Legacy only/Legacy first/UEFI first. Default setting is

Legacy

only.

Launch Video OpROM policy

Determines which devices system will boot to.

Options available: Do not launch/UEFI only/Legacy only/Legacy first/UEFI first. Default setting is

Legacy

only.

•

The following five items appears and configurable when the

Launch CSM

is set to

Enabled

•

If the

Launch CSM

is set to

Disabled,

the following five items will not be able to support Legacy

mode.

Summary of Contents for GA-6LXGH








































































































Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-6LXGH, User Manual

Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands