GIGA-BYTE TECHNOLOGY GA-6LXGH User Manual Download Page 94

Page: 94 / 103

BIOS Setup

- 94 -

2-7 Boot Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error

message if the legacy drive(s) specified is not bootable.

Boot Configuration

Setup Prompt Timeout

Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting."

Press the numberic keys to input the desired value.

Bootup NumLock State

Enable or Disable Bootup NumLock function.

Options available: On/Off. Default setting is

Quiet Boot

Enables or disables showing the logo during POST.

Options available: Enabled/Disabled. Default setting is

Enabled

Boot Priority Order

Boot Option #1/#2/#3/#4

Press Enter to configure the boot priority.

By default, the server searches for boot devices in the following secquence:

1.  UEFI device.
2.  Hard drive.
3.  Network device.
4.  Removable device.

Summary of Contents for GA-6LXGH








































































































Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-6LXGH, User Manual

Search results

Summary of Contents for GA-6LXGH

Reviews:

Related manuals for GA-6LXGH

Brands by name

Popular brands