GIGA-BYTE TECHNOLOGY GA-6LXGH, User Manual

Page: 34 / 103

- 34 - Hardware Installation
28/29) PCH_ME/ME_UPDATE (ME Recover Jumpers)
1-2 Close: Normal operation (Default setting)
1-2 Close: ME recovery mode.
PCH_ME
ME_UPDATE
2-3 Close: ME recovery mode.
2-3 Close: Normal operation (Default setting)
1
1
1
1
PCH_ME
ME_UPDATE
30/31) SATA_DOM0/SATA_DOM1 (SATA port 0 and port 1 DOM Jumpers)
SATA_DOM1
SATA_DOM0
1
1
CAUTION!
• If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2.
• If the SATA DOM power is supplied by external power, set the jumper to pin 2-3.
• If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed
and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage.
Please refer to the pin definition table in the following.
Pin No. Definition
1 P5V
2 SATA_DOM_0
3 GND
For SATA_DOM0
Pin No. Definition
1 P5V
2 SATA_DOM_1
3 GND
For SATA_DOM1