F4 PLUS
UK
11
Ÿ
Red warning LEDs for the N.C. contacts (FCAM1-FCCM1-FCAM2-FCCM2-PHOTO-STOP).
Ÿ
Green warning LEDs for the N.O. contacts (START-PED).
Ÿ
Control of one 12VAC electric lock.
Ÿ
Hammer stroke control.
Ÿ
Run, pause and phase shift time adjustment.
Ÿ
Fixed or intermittent flashlight control.
Ÿ
Courtesy light control.
Ÿ
Programming of automatic closing.
Ÿ
Photocell active during closing (operation during opening can be selected with a DIP switch).
Ÿ
Motor force adjustment with appropriate trimmer.
Ÿ
Operating range: Automatic - Step-by-step - Step-by-step with automatic closing - Pedestrian.
Ÿ
STOP input control with functioning as STOP (lock) or 8K2 frame (obstacle freeing).
Ÿ
Hydraulic retention for hydraulic motors (DIP 10 ON).
Ÿ
DIP switch to disable the LIMIT SWITCH and PHOTOCELL inputs if not used.
2 - TECHNICAL SPECIFICATIONS/FUNCTIONS
1 - TECHNICAL SPECIFICATIONS
F4 PLUS
230 VAC single-phase 50/60 Hz
1or 2
230VAC
230VAC 40W max
24VAC 3W max
Plug-in
-20°C +60°C
24VAC 8W max
Electronic control unit for automation of a swing gate, sliding
gate, overhead door or barrier with one or two 230 VAC motor
Control unit
Power supply
No. of motors
Motor power supply
Flashlight
Warning light
Radio receiver
Operating temperature
Accessory power supply
Type
WARNINGS:
This product has been tested by GI.BI.DI. for full compliance with the requirements of the directives in force. GI.BI.DI. S.r.l. reserves the right to
change the technical data without prior notice in relation to product development.
DISPOSAL:
GI.BI.DI. advises recycling the plastic components and to dispose of them at special authorised centres for electronic
components thus protecting the environment from polluting substances.
CAREFULLY READ THESE INSTRUCTIONS BEFORE PROCEEDING WITH INSTALLATION.
Thank you for choosing GIBIDI.
AS05850
Code
12VAC 15W max
Electric lock
IP55
Degree of protection
