Radio safety solution for
industrial sliding gates
with NO-TOUCH technology.
Based on 3 devices: • Transmitter (CAP T868/916, CAP ACTIVE 868),
• Receiver (CAP R868/916)
• Inhibition detector (CAP MAGIN).
•
Suitable for all kind of metallic / aluminum sliding gates
• Category 2 devices.
CAP system is not suitable for wooden gates neither other non conductive materials
The safety edge device provides security degree. NO-TOUCH detection is a courtesy function.
The NO-TOUCH detection is not working all of the time, it only works when the gate is in motion.
It detects
metal or conductive objects near the safety edge
. It cannot detect plastics, glass or other non-conductive
materials.
The receiver manages the activation and deactivation of NO-TOUCH function
depending on the status of the
inhibition detector (inhibition input).
Inhibition detector is based on magnetic fields thanks to the use of 2 polarized magnets (grey and black).
These
2 magnets are responsible for activating and deactivating NO-TOUCH sensor on the transmitter.
It is
necessary to deactivate NO-TOUCH sensor at a distance of 30-50cm before the door is totally closed (inhibition
zone).
The system complies with EN ISO 13849-1:2008, category 2, PLd. (when the auto-test function is used).
SAFETY EDGE CONNECTION
BATTERY CONNECTOR
Connect the batteries for operation
Do not carry the equipment with
batteries connected
LITHIUM BATTERIES
2X3,6Vdc ER14505
(Class 2 supply)
LEDS
BS&NO-TOUCH safety edge state indicator
PROGRAMMING BUTTON
Program the transmitter to the receiver
GND. REFERENCE TAB
OPTION SELECTOR
(SENSITIVITY)
SENSITIVITY
Recomended
sensitivity range
adjustment
between 5-6
CLOSING GATE
IN
H
IB
IT
IO
N
Z
O
N
E
CAP ACTIVE
OR CAP T
CAP
MAGIN
COURTESY FUNCTION
SAFETY EDGE
MAGNET
MAGNET
CAP R868
C
A
P
A
C
T
IV
E
CAPTIVE
2
CAPTIVE
3
EN
EN
1 - INTRODUCTION
1.1 - GENERAL DESCRIPTION
LEDS
BS&NO-TOUCH safety edge
state indicator
BATTERY CONNECTOR
Connect the batteries for operation
Do nor carry the equipment with
batteries connected
PROGRAMMING BUTTON
Program the transmitter to the receiver
MIN.
SENS.
MAX.
SENS.
OPTION SELECTOR
(SENSITIVITY)
Indicates the NO-TOUCH
sensitivity range
LITHIUM BATTERIES
2 X 3,6Vdc ER14505 AA
(Class 2 supply)
SAFETY EDGE
MECHANICAL
NO-TOUCH
LED
D1
D2
Recommended
sensitivity range
adjustment
between 6-7
1.2 - CAP T868/916 TRANSMITTER
1.3 - CAP ACTIVE TRANSMITTER
LED INDICATOR
LED
ON
SAFETY
EDGE
D1
D2
NO-TOUCH
Deactivated
Normal
use
FLASHING
OFF
