6 | Operation
OMNIPLUS-F
20/ 45
C-E01_X__OMNIPLUS-F__DB2-1.0
6.2 Configuration
6.3 Description
The following action steps describe how to configure the OMNIPLUS-F for your pur-
poses.
NOTE
Slide's
Configuration
submenu offers a variety of different parameters that you can
change and adapt to your desired conditions using the multifunction ring.
Depending on the menu or parameter selection, subsequent menu items may be invis-
ible if they are not required for further configuration.
Example:
Volume totalizer
Totalizer is ON. With
Ring Turn
further menu items are offered
(Reset Mode Preset counter
Preset unit
Preset value).
Totalizer is set to OFF. With
Ring Turn
no further menu item is offered
.
Display shows
<< < . With Ring
Shift you return to the previous configuration level Volume
totalizer.
6.4 The submenus
The configuration in the submenus is explained below.
1.
Configuration
submenu is selected.
2. The display shows the configuration options on the first level. Navigate through this
level with a
RING TURN.
Confirm your selection with a
RING SHIFT.
NOTE
Only the Pin Settings submenu has another configuration level. Here, one input and
several outputs can be configured separately with the respective parameters.
3. The display shows the first parameter. With a
RING SHIFT
you reach the page for
setting a value. This is now displayed either as a list selection or via numerical val-
ues.
4. You can change the selection with a
RING TURN. The
selection is confirmed by a
RING SHIFT.
The selected and confirmed value is saved. The display returns to the previous page.
The selected value is displayed.
