GFS NETLIGHT Quattro, Manual

Page: 8 / 58

system documentation quattro GB V13.docx / Page 8
F
1.3 Explanation of symbols
The following symbols indicate technically important safety instructions in this manual. These must be observed since they relate to occupational safety.
Attention! Risk of injury or death
This symbol is used to identify information which, if ignored, may result in injury, health problems or even death.
Caution!
This symbol is used to identify information which, if ignored, may result in system failure or even material damage.
Notes
This symbol provides important information for working with the system or parts of it.
1.4 Intended use
The central power supply system is only suitable for use in safety lighting systems. It is used to monitor and control the safety lighting system with general lighting and emergency
lighting. The system is equipped with an automatic testing device. Intended use can only be guaranteed if the setting / programming is carried out exclusively by trained specialist
personnel with all the necessary knowledge for safety lighting systems.
1.5 Configuration
Please note that the Quattro is configured via the USB interface, see page 50.
Do not remove the SD card, as it contains the operating system of the system. Changes to the SD card can or will lead to system failure;
only the manufacturer or authorised service personnel may make changes.
!
!