GFS NETLIGHT Quattro, Manual

Page: 12 / 58

system documentation quattro GB V13.docx / Page 12
3.3 Opening/closing the device
After closing replace
the screws.
Observe the safety instructions
under section 1.2!
Inside view
Dome pins for fixing the
housing cover; when closing,
make sure that the pins are
seated correctly in their
uptakes.
When closing the hood, first
place it at an angle with the
upper dome pins and then
fold it down
Remove screws
On both sides of the hood
lift the side walls from the
rear and from below
After lifting fold
up to the front,
vice versa when closing