GFS NETLIGHT Quattro, Manual

Page: 53 / 58

system documentation quattro GB V13.docx / Page 53
Network
Select and confirm Use the arrow keys up / down / right
to set the corresponding numbers and
The same procedure applies to the items "NETWORK MASK" and "GATEWAY", after which the device is configured for the network. confirm with OK
7.9 Service Menu
Maintenance
OFF/ON, adjust Date + Interval
Is the period / interval has elapsed, the INFORMATION Acknowledgment is on display plant maintenance. This message can only be acknowledged in the Service menu in the menu item
Plant Maintenance by a service employee. To do this simply acknowledge the proposed date or select a new time / interval or deactivate it if not desired.
Passwords (change all Passwords)
Select Password and press OK
Adjust discharge current
the current is determined correct current value, end with the left arrow
The current is measured, using a pair of current clamps to measure the current on the plus or minus line and compare it with the left value and, if necessary, correct it with the arrow keys up /
down. Confirm with OK and exit via the arrow on the left or the menu key.
MAINTENANCE
activ off
Date: tt:mm.yyyy
Interval: X Month/Year
SERVICE MENU
Maintenance
Passwords
Adjust dis. curr.
SERVICE MENU
Maintenance
Passwords
Adjust dis. curr.
◄
OK
OK
◄
◄
◄
◄
PASSWORDS
Password 1 (User)
Password 2 (Electrician)
Password 3 (Service)
SERVICE MENU
Maintenance
Passwords
Adjust dis. curr.
"The change is made as described
under the user menu or electrician
menu"
◄
OK ◄
1x
◄ OK
◄
ADJUST DIS.CURR.
Measur. Corr.
. . . .
SERVICE MENU
Maintenance
Passwords
Adjust dis. curr.
ADJUST DIS.CURR.
Measur. Corr.
x.xA x.xA
◄ OK
◄
◄
◄
2x
▲
▬
▼
▲
▬
▼
NETWORK
Get IP
Address
INSTALLATION MENU
Load config.
DNÜ
Network
ADDRESS
IP
Network mask
Gateway
IP
xxx.xxx.xxx.xxx
◄
OK
OK
◄
◄
◄
◄ ◄
9x
OK
1x
◄
▲
▬
▼
OK