GFS NETLIGHT Quattro, Manual

Page: 7 / 58

system documentation quattro GB V13.docx / Page 7
1. Important information
1.1 Notes for qualified personnel
Attention! Risk of injury or death
Only authorised and trained persons, who take all safety regulations into consideration, may carry out work on the equipment. Wrong or faulty installation may result in personal
injury and/or property damage.
-
Cable lengths must be taken into account and must not be exceeded.
-
Protection type and class must be designed according to the local conditions.
-
Ventilation or cooling of the systems and their components must be ensured.
-
The environment and work area must be set up in accordance with occupational health and safety regulations or comply with local safety regulations.
-
E30 enclosures must be adapted to local conditions and installed horizontally. Particular attention must be paid to the fire resistance duration,
compliance with the specimen guidelines according to MLAR 11/2005 and EltBauVO 01/2009.
The depicted views/illustrations shown in this manual may differ from the delivery status. Special or customer-specific versions are listed/described as attachments in the appendix of
this manual.
Guidelines/standards
The installation may generally only be carried out in accordance with the relevant guidelines and standards of electrical engineering, for this purpose the national regulations and
guidelines of the installation location/country must be observed.
Only luminaires with electronic ballasts that correspond to the respective operating voltages specified in the data sheet may be used on the final circuits of the
system. The nominal operating voltage of the system is 230V/50Hz. The use of conventional ballasts will destroy the circuit electronics!
These operating and assembly instructions do not contain all detailed information on all types of the product series and cannot take into account every application of the products. All
information is for the sole purpose of describing the product and is not to be understood as warranted characteristics in the legal sense. Further information and data can be obtained
from your supplier or directly from the manufacturer.
1.2 Safety instructions
Working on the system
For safety reasons, the system must be disconnected when working on it. (When working on electrical systems, the five safety rules must be observed)
Important note: In systems with battery voltage, switching off the mains supply triggers automatic switching to the battery voltage! The battery may only be disconnected or
switched off when it is not under load (risk of arcing). To do so, follow the sequence in point 6.3.
Attention! Risk of injury or death
Generally speaking, there is an increased risk of injury or death when working on batteries or with battery voltages, so it is essential to ensure correct operation. Please read the
information provided by the battery manufacturer and the instructions of the battery mounting personnel.
The Netlight quattro works internally with 24V DC! (charger, battery, inverter)