GFS NETLIGHT Quattro, Manual

Page: 16 / 58

system documentation quattro GB V13.docx / Page 16
3.7 Connection compartment
Terminal cross section –X2, X4, X6 to X9:
0.08-1.5mm² single-wire/fine-stranded wire,
0.25-1.5mm² fine-stranded with ferrule
with/without plastic collar.
Stripping length 5-6mm
Terminal cross section –X5
0.5-1.5mm² single-wire/fine-stranded wire,
0.5-1.5mm² fine-stranded with ferrule
with/without plastic collar.
Stripping length 7.5-8.5mm
Signalling relay contacts:
Switching capacity - 1250VA/AC | 150W/DC
Switching voltage - max. 125V/DC | 250V/AC
Switching current - max. 5 A
Nominal load:
250 V/AC | 5 A
30 V/DC | 5 A
-X8 terminals for 4x final circuits L/N/PE
Colour grey/ blue/ light green
230V 50Hz from mains or inverter.
per circuit - fuse protection 6.3x32 T1.6A
per circuit max. 200VA
Total power of circuits 1 to 4 max. 350VA
-X2 / signalling terminals
There are 3x messages: fault,
battery operation and ready for
operation.
-X5 power supply SV/24V for
panel (see 5.3)
Connection compartment
Signalling terminals
-X9 grey/ blue/ light
green terminals for
mains connection
L/N/PE 230V 50Hz
1-phase
Mains fuse
6.3x32 T 6.3A
-X4: Module BUS
-X5: 1- 2 Mains monitor connection with loop monitoring
-X5: 3-10 Digital inputs for pot. free contacts
-X5: 11-14 24V OUT (panel supply)
For connection see chapter 5
-X6 - 4x Digital inputs
230V AC for switching or
local emergency operation or
three-phase network monitor
(s. chap. 5)
Mains
Final circuits
Digital inputs