background image

Georg Fischer Signet LLC, 3401 Aero Jet Avenue, El Monte, CA 91731-2882 U.S.A. • Tel. (626) 571-2770 • Fax (626) 573-2057
For Worldwide Sales and Service, visit our website: www.gfsignet.com • or call (in the U.S.): (800) 854-4090
For the most up-to-date information, please refer to our website at www.gfsignet.com

3-8250.090-2 Rev. H  01/13   English 

 © Georg Fischer Signet LLC 2013

Ordering Information

Mfr. Part No. 

Code 

 

Description

3-8250-2 

159 000 766 

Level Transmitter, Field Mount

3-8250-2P 

159 000 767 

Level Transmitter, Panel Mount

3-8059-4 

159 000 772 

External 4-Relay Module

3-8059-4AC 

159 000 773 

External 4-Relay Module with Power Supply

Note: 

When using the 8059-4 or 8059-4AC, only relays 1 and 2 can be utilized with the 

fl

 ow instrument.

Accessories

Mfr. Part No. 

Code 

 

Description

3-8050   

159 000 184 

Universal mounting kit

3-8050.395 

159 000 186 

NEMA 4X Back Cover

3-8052   

159 000 188 

3/4” Integral mounting kit

3-8050.396 

159 000 617 

RC Filter Kit (for relay use), 2 per kit

3-0000.596 

159 000 641 

Heavy Duty Wall Mount Bracket

3-9000.392 

159 000 368 

Liquid-tight connector kit, 3 sets, 1/2 in. NPT5

3-9000.392-1 

159 000 839 

Liquid-tight connector kit, 1 set, 1/2 in. NPT5

3-9000.392-2 

159 000 841 

Liquid-tight connector kit, 1 set, PG 13.5

7300-7524 

159 000 687 

7.5W 24V Power Supply

7300-1524 

159 000 688 

15W 24V Power Supply

7300-3024 

159 000 689 

30W 24V Power Supply

7300-5024 

159 000 690 

50W 24V Power Supply

7300-1024 

159 000 691 

100W 24V Power Supply

Summary of Contents for Signet 3-8250-2













Reviews: