10
Lubricating Your Machine
After cleaning the product contact parts and prior to reassembling the
machine, make sure to apply a small amount of Sana-Lube #2000 or other food
grade lubricant to the piston and valve rotor (Pallet). Make certain to coat the
entire part, but do not over apply it. You can order Sana-Lube #2000 by calling
us at (215)379-1234 or email to [email protected]. Also, it is
advisable to apply some Sana-Lube #2000 to the air cylinder rods periodically to
help maintain a smooth operation.
Keep all threaded parts tightened!!
Threaded parts may come loose during every day use. Check them before
each run. Loose parts could cause problems! The piston rod clevis should be
tightened as much as possible onto the air cylinder rod it is connected to. The
piston and alignment coupler should be fully tightened as well. All quick
disconnect clamps must be kept tight. Hand tightened is good enough. Keep all
bolts on the fill valve and air cylinders tight as well (just a couple of turns beyond
hand tightened).
