9
Machine Cleaning / Maintenance
– continued
10.
Start by screwing the piston on the air cylinder rod. Apply some lubricant on the
piston and just at the Open end of the cylinder (see section "Lubricating Your Machine"
page 11) Slide the cylinder over the piston. (
Don’t cover the opening in front or you won't
be able to push it on the because, the air needs to escape)
11.
Lubricate the valve rotor(pallet) and valve and then reassemble.
12.
Re-attach the valve to the base and tighten the bolt all the way.
13.
Now re-connect the cylinder to the cylinder port in the valve.
14.
Then insert the pin into the piston rod clevis and the pallet crank. (See reference
in section
marked "Keep all Threaded Parts
Tightened “page 11)
15.
Finally re-install the hopper and re-connect the air compressor. And the machine
is ready to stat filling again
All you should need for this maintenance is a 5/16" wrench. We do offer a complete tool
kit with a large assortment of tools. Contact us for pricing at (215)379-1234
