GEV 003033 Manual Download Page 4

Page: 4 / 37

Please read carefully and retain!
In buying this item you have opted for a high-quality
GEV product. Please read these user instructions
carefully to ensure the device is used correctly.
Keep them in a safe place for future reference. Use
this product only as intended (as set out in the user
instructions). Any changes or modiﬁ cations to the
product or painting it will result in loss of warranty.

Introduction

This smoke alarm (referred to below as smoke detector)
is designed to warn residents as early as possible in
the event of a ﬁ re. The warning (alarm) is triggered
by the smoke detector as soon as smoke enters the
measuring chamber.
The product features a lithium battery with a run time of
approx. 10 years depending on the surrounding area.
The FMR 3569 product features a lithium battery with
a service life of approximately 10 years, depending on
the surrounding area. The FMR 3033 and FMR 3392
products off er a battery life of approximately 3 years.

Intended use

•  The smoke detector FMR 3569 is designed for
  domestic use. The smoke detector‘s warning feature
  alerts residents in the property to ﬁ re, enabling them
  to react appropriately.
•  In the event of a ﬁ re, they can alert the ﬁ re service
  or emergency services and evacuate the danger
  zone. Keep doors and windows closed.
•  If possible, warn other residents in the building.
•  This is particularly important for the elderly or people
  with restricted mobility.
•  Note: people sleeping soundly or under the inﬂ uence
  of alcohol, drugs or medication are unlikely to hear
  the audible signal.
•  Please note that the human sense of smell is inactive
during

sleep.

Safety instructions

• Only use the recommended battery in the
device and ensure that it is correctly inserted
according

Fig. 2

• The mounting lock prevents installation

of the smoke detector if the battery is not inserted
correctly

(Fig. 2A)

•  Do not paint over smoke detectors. Protect the
  device, especially during renovation work.
•  Altering the product or operating the device beyond
  the technical speciﬁ cations will render the guarantee
  void and can reduce the device‘s operation or even
  render it inoperative.
•  Do not cover the smoke detector with tape.
•  Note: smoke detectors cannot put out ﬁ res or prevent
  ﬁ res from starting or spreading.
•  Note: risk of explosion in the event of improper
battery

use.

•  In certain countries there are legal requirements
  regarding the use and operation of smoke alarms.
  The standard DIN 14676 contains further information
  for Germany.

Display and operating elements

• The product features a test key

Fig. 3C

with an

  inbuilt optical display (LED). Press and hold the test
  key for approx. 20 seconds to test the smoke
  detector‘s operation and battery. The subsequent
  alarm signal will switch off  automatically after approx.
  20 to 30 seconds. The smoke detector is then ready
for

use.

Project planning

Ensure basic protection by installing smoke detectors
in all bedrooms, playrooms and corridors according to

Fig. 5

. We recommend that you install smoke detectors

in all rooms so that you can be given the earliest possible
warning throughout your home in the event of a ﬁ re. In
rooms which have a surface area of over 60 sqm. and
in corridors longer than 10 m, we recommend the use
of several smoke detectors to ensure optimum smoke
detection. Installation examples:

Fig. 5

and

Fig. 6

Smoke detector FMR

Funktionstabelle

Tonart

Rote LED

Erläuterung

Pulsierender Alarmton

Parallel blitzend zum Alarmton

Einzelauslösung des Melders bei
Rauchalarm. Stellt sich automatisch
zurück sobald kein Rauch detektiert wird

Pulsierender Alarmton

Keine LED-Anzeige

Auslösung durch einen vernetzten
Melder. Der auslösende Melder kann
durch die parallel zum Alarmton
blitzende LED identiﬁ ziert werden. Stellt
sich automatisch zurück sobald kein
Rauch detektiert wird

Kurzer Piepton ca. alle 45 Sek.

Parallel blinzend

Batteriewechsel notwendig

Kein Ton

Blitzend im 45 Sek. Abstand

Betriebsbereitschaft

Kurzer Piepton ca. alle 45 Sek.

Abwechselnd zum Piepton blitzend Fehlfunktion, Melder austauschen

Technische und optische Änderungen ohne
Ankündigung vorbehalten.

FIN

RUS