NORDAC SK 530E with PosiCon funktion
38
Subject to technical changes
BU 0510 EN
Information:
Parameter
Setting value / Description / Note
Device
Supervisor
Parameter set
P744 Configuration
This parameter displays the special devices integrated in the FI. Display is in hexadecimal
code (SimpleBox, ControlBox, Bus system).
The display is in clear text when the ParameterBox is used.
0000 ... FFFF (hex)
Standard IO
SK 500E = 0000
Extension- IO / Encoder
SK 520E = 0101
Extension- IO / PosiCon
SK 530E= 0201
P748
... - 01
…
... - 03
Status CANopen
SK 520E
SK 530E
S
[01] =
CANbus/CANopen Status
[02] =
reserved
[03] =
reserved
Bit 0 = 24V bus voltage supply
Bit 1 = CAN bus in "Bus Warning" status
Bit 2 = CAN bus in "Bus Off" status
Bit 3 ... 5 = vacant
Bit 6 = Protocol of CAN module is
0
Æ
CAN or 1
Æ
CANopen
Bit 7 = vacant
Bit 8 = "Bootsup Message" sent
Bit 9 = CANopen NMT State
Bit 10 = CANopen NMT State
Bit 11 = vacant
Bit 12 ... 14 = reserved
Bit 15 = vacant
0000 ... FFFF (hex)
CANopen NMT
State
Stopped
Pre-Operational
Operational
Bit 10
0
0
1
Bit 9
0
1
0
