2.3.3 DDR3-SDRAM
Disassembly
1. Carefully put the notebook upside down. Remove the battery pack. (See section 2.3.1 Disassembly)
2. Remove eight screws fastening the CPU cover. (Refer to step 2 of section 2.3.2 Disassembly)
Figure 2-5 Remove the SO-DIMM
3. Pull the retaining clips outwards (
n
) and remove the SO-DIMM (
o
). (Figure 2-5)
1. To install the DDR3, match the DDR3's notched part with the socket's projected part and firmly insert the
SO-DIMM into the socket at 20-degree angle
.
Then push down until the retaining clips lock the DDR3 into
position.
2. Replace the CPU cover and secure with eight screws. (Refer to step 3 of section 2.3.3 Reassembly)
3. Replace the battery pack. (See section 2.3.1 Reassembly)
Reassembly