Get Console Airconsole, User Manual

Page: 42 / 48

The master Airconsole can optionally set the line properties (Baud rate etc) which will be
applied to the remote Airconsole to ensure that both serial port configurations match.
Successful connection to the remote Airconsole will be visible on the Status (home)
page.
8.2 Resetting to Factory Defaults
If you somehow lose the ability to login to the air console webpage, you can reset the
whole device back to its factory settings via the small pin-hole on the side of the unit that
is marked with "R".
8.2.1 Factory Reset procedure for version 1.x Firmware
With the unit powered on, insert a paperclip to press the reset button, and keep it
pressed on until the AirConsole starts blinking red.
The Airconsole will go through blinking red and then blue and then red again. After
around 1 minute, the air console should be slowly blinking blue again indicating that it
has returned to its factory default configuration
For Wifi access: SSID=Airconsole-XX, password 12345678
For Web console: Web address is airconsole-XX.local , Admin username and password
are "admin"