Get Console Airconsole, User Manual

Page: 15 / 48

options are Static Assignment (Default) or DHCP Client.
4.2.2 Static IP Address
Static IP Addressing sets the Bridge IP manually. This is the factory default behavior
with the Bridge IP set to 192.168.10.1/24. This can be changed by populating new
values and clicking Apply.
For static IP addressing in a WIFI only setup, only set the IP Address and Netmask.
Note that if changing from the default 192.168.10.0 subnet, and the DHCP server feature
is also required then the DHCP server range should also be changed on the DHCP
server page as well.
Note that the static IP address allocated to Airconsole must be in the same subnet as
the addresses allocated by any DHCP located on the wired LAN network otherwise
Airconsole will not be able to communicate with clients connected wirelessly or via wired
LAN.
We recommend using Static mode in 3 situations
1) When the Wired port is not connected
– Airconsole is operating in WIFI only
mode and will use the DHCP server feature to allocate IP addresses to WIFI
clients
2) When the wired port is connected however no DHCP Server is on the wired LAN.
Airconsole needs to have a statically configured IP address to integrate into an
existing statically addressed network
3) When there is DHCP server on the wired LAN but Airconsole needs static IP in a
range not assigned by the DHCP server while the wireless PC/iPad/iPhone