Get Console Airconsole, User Manual

Page: 24 / 48

translate all the
“LAN” (ie 192.168.10.x) hosts to the AP Client interface address to allow
for example external web browsing.
4.4.1 AP Client Configuration
To configure AP Client use the Wireless->AP Client page.
This page takes a little while to load as is doing a site survey (scan) of available wireless
networks to connect to.
The Site Survey results appear at the bottom of the AP Client page. Select the WIFI
network you wish Airconsole to join which will populate the SSID in the top of page form.
Complete the password for the selected WIFI network and Apply button.
Airconsole will attempt to join the selected WIFI network using the supplied credentials.
Note that as this process often takes longer than 10 seconds, browsers such as Safari
will often time out
and report “failed to connect to website” or similar web page. If this
happens simply connect again to the Airconsole on its LAN address (ie
http://192.168.10.1 )