3
Getting Started
Before sending a job to the plotter, you need to perform these preliminary steps:
Unpacking and setting up the plotter
Connecting the plotter to the computer
Turning on the plotter
Setting up the software
Using the control panel and menus
Loading material
Installing tools
Unpacking and setting up the plotter
For the enVision 750, follow the unpacking instructions included with the
plotter to unpack it, assemble the stand, and mount the plotter on the stand.
For the enVision 375, follow the unpacking instructions included with the
plotter to unpack it.
In either case, save the unpacking/packing instructions and the packaging
materials in case you need to ship the plotter in the future.
CAUTION: Always repack the plotter using the original packaging
materials. Failure to repack the enVision plotter with the original
packaging materials may result in damage to the unit during shipping.
Gerber is not liable for shipping damage due to improperly packed units. If
you do not have the proper packaging materials, contact Gerber Field
Service to obtain the materials.