Advanced enVision Functions 45
(
Setting acceleration
The acceleration setting represents how fast the tool head and material will get
up to the speed setting. High acceleration will make the tool head and material
move with quick, sudden motion. Low acceleration moves are gentle and
smooth. The range is expressed in units of gravity (G) from 0.2G to 3.0G in
increments of 0.2G.
You may want to change acceleration for the following reasons:
heavier backed materials require lower acceleration values
small characters require lower acceleration values
large characters can use higher acceleration values
higher acceleration results in faster throughput
1.
Use the Settings menu to verify that the material whose settings you want to
modify is the one that is currently selected. (Refer to “Fine tuning the
enVision” on page 29 for details.)
2.
From the MAIN MENU, Press F3 while holding down the ENTER key for
the Operational Setup menu.
3.
Press F1, SETTINGS.
4.
Press F2, ACCEL.
5.
Press F3 to increase the acceleration or F4 to decrease it. The maximum
setting is 3.0G.
(
(
12'4#6+10#. 5'672
5GVVKPIU
5[UVGO
6GUV
/KUE
'06'4 HQT /CKP /GPW
%744'06 5'66+0)5
5RGGF
(QTEG
#EEGN
%QTPGTU
'06'4 HQT /CKP /GPW
'06'4 #%%'.'4#6+10
#EEGN
)
'06'4 -G[ VQ #EEGRV
(