Plotting Jobs 25
Running multiple jobs automatically
In Multi mode, if you press F1, Start-Job before sending a job to the plotter, the
job will begin as soon as the plotter receives it without requiring another key
press, provided the following conditions are met:
Material has been loaded and a tool is installed.
The cover is closed.
A slew key has not been pressed to reposition the tool head or material.
(This is to prevent the plotter from starting while the knife is being
positioned.)
You can also slew between jobs, but must then press the Start-Job key to start
the next job when it is received.
Pausing and restarting a job
Pausing a job suspends it temporarily. You can pause a job by lifting the cover
or pressing F1, Pause-Job. The plotter stops cutting or plotting at the end of the
current shape. After pause, you can look at your job by using the slew keys to
move the material. When you restart the job, the plotter resumes repositions
itself and starts cutting at the position where it stopped.
Note: Once a job has begun, slewing will not affect the job.
1.
To pause a job, press F1, Pause-Job.
2.
The current Job Status changes to
2CWUGF
. To restart the job, press F1,
Start-Job. The plotter returns to the previous position and resumes cutting or
plotting.
When all jobs have plotted the plotter returns to
0Q ,QD
status.
(
/#+0 /'07
2CWUG,QD
5GVVKPIU
/QFG 5KPING
,QD 5VCVWU
4WPPKPI
/#+0 /'07
5VCTV,QD
5GVVKPIU
/QFG 5KPING
,QD 5VCVWU
2CWUGF
(