Gerber ADVANTAGE ROUTER 600, User Manual, Page: 90 / 114

82 ADVANTAGE Router
5. Clean the gear teeth using a small dry brush. Brush the debris
out and away from the drive pulley.
6. Reach in and around the gear box to locate the damper.
7. Move the gear by turning the silver damper located on the end
of the blue motor so the entire gear surface can be cleaned.
8. When finished, replace the end housing hood.
9. Plug in the Y motor cable at the rear of the electrical cabinet.
CAUTION: Be sure the X, Y and Z motors are plugged in at
the rear of the electrical cabinet before turning ON the router.