Gerber ADVANTAGE ROUTER 600, User Manual, Page: 32 / 114

24 ADVANTAGE Router
5. Change the Feed Rate parameter, if necessary.
6. Turn ON the router motor.
7. To avoid hitting clamps, manually slew close to where the job
will resume.
8. Press the START/STOP key to continue the job. The router
will return to the pause position, then enter STOP JOB mode.
Press START/STOP again to resume the job.
REPEAT JOB
To repeat a job at the same position as the previous job, before
pressing START/STOP:
1. Press SELECT while in the STOP READY or STOP JOB
mode to access the Menu Select mode.
2. Press the right or left arrow key until Return Home appears in
the message box.
3. Press SELECT. The motor carriage will move to the job home
position.
4. Press START/STOP to begin processing the job.