Gerber ADVANTAGE ROUTER 600, User Manual, Page: 30 / 114

22 ADVANTAGE Router
STOP MODE
STOP mode, as shown by a message in the display panel, may be
in one of two states:
„
STOP READY - the router is in an "idle" state waiting to
receive data
„
STOP JOB - the router is in a "pause" state during a job
The following keys are available in STOP mode:
„
START/STOP
„
RESET
„
Z INIT
„
SELECT
„
arrow keys
STOP READY
In STOP READY, the GRAPHIX ADVANTAGE sends data to the
ARC Box. The system beeps when data is received and
J,j is
displayed in the lower right corner of the message display panel.
„
Press the START/STOP key to begin the job.
„
The carriage can be slewed to establish a start position for
the next job.
The job start position can be changed in the STOP READY mode.
It can also be changed when one of the following occurs:
„
SET HOME is selected from the menu
„
the job completes
„
the operator presses RESET to abort the job and clear it from
the ARC Box
„
the ARC Box receives a terminate command from the
GRAPHIX ADVANTAGE Plot Spooler.