Gerber ADVANTAGE ROUTER 600, User Manual, Page: 73 / 114

System Preparation and Use 65
USING SPRAY ADHESIVE
Refer to the manufacturer's suggestion on the can. Follow these
steps when using spray adhesive to attach the workpiece to the
sacrificial material:
WARNING: Apply spray adhesive only in a well-ventilated
area.
1. Spray the adhesive in smooth, even strokes across the back of
the workpiece. Coat the entire surface uniformly, including
edges and corners, until tacky but not wet.
2. Then press the workpiece firmly onto the sacrificial material.
CAUTION: Spray adhesive is sticky. Do not spray near the
router table.