Gerber ADVANTAGE ROUTER 600, User Manual, Page: 59 / 114

System Preparation and Use 51
The V Cutter creates a pointed channel around the character.
The V Cutter creates a channel with a 90 degree angle. Each side
of the channel is 45 degrees.
Note: Materials which have an uneven thickness may produce
poor results when engraving.
CUTTING TOOLS
The tool kit contains six spiral fluted solid carbide cutting tools.
Cutters used with the Router 600 must have a .499
- .500, .249 -
.250, or .124 - .125 inch shank for use with the .50, and .25-inch
collets, or the .125-inch collet adapter supplied in the tool kit. All
tool bits must have plunge capabilities.
Note: Metric collets and tools are available from a Gerber
distributor.